Upsetting Vise

Vise Material List

Gear Rack 1 ½ x 1 ½ x 6 pitch x 36”
(Boston Gear PN L521-6) Grainger PN 1L908 (6’ long makes 2), MSC also has

Leaf spring Actual size optional: 3/6” -1/4” thick x 2” –2 ½” wide x 16” – 24” long

Base Actual size optional: 1 x 12” x 12” steel plate

Vertical support 1 ½” x 1 ½” solid, CRS x 36” long

Dies 1 ½” x 1 ½” CRS x 7” per die set (2 sizes per die set).

Die Retainer ½” x 1 ½” CRS
Clamp ½” x 1 ½” CRS
Stop retainer ½” x 1 ½” CRS Allow 48” of ½’ x 1 ½’ CRS per vise

Cam 1 ½” diameter CRS x 1 ½” long
Cam Handle ¾” black pipe x 12” –16”
Cam pivot ½ -13 Grade 8 bolt. 3 ½” no threads (Measure from under head to start of thread)
Stop Pivot ½-13 Grade 8 bolt 2 ½” no threads
Pivot retainers ½ -13 lock nut (qty: 2 )

Bottom Pivot ½” x 4” CRS x 9”
Pivot shaft 1” diameter CRS x 4”
Pivot shaft retainer 1” diameter shaft collar, set screw retained

Adjusting screw ½ -13 grade 8 all thread x 4” or ½ -13 bolts with ¾” min thread
Stop lock
Knob counterbalance ½” diameter HRS x 20”

Die lock bolts 3/8-16 x 1 ¼’ long hex head bolts (qty: 6) Flat washers (qty: 6)
Spring retaining bolts